Update: 05/03/2014 (Read down for older updates)
Well, I've had a busy time of it for the last couple of weeks. Unfortunately, not busy doing modelling or painting. Illness and family commitments took precedence, so my rate of progress has slowed.
But I'm making a push for the end of this project.
In the last couple of days I've had my first go at using an oil-wash.
For those not in-the-know, oil washes are made by mixing oil paint (artists oil - not decorator's gloss!) with white- or mineral-spirit in order to really thin it down. Apply a coat of gloss varnish to the model, let it dry, load up your brush with the wash and gently touch it to the area you want to fill. Capillary action "sucks" the wash from the brush and it goes shooting along all those lines between panels and so on. Drying time is longer as you have to wait for the spirit to evaporate and the oil to dry, but the ease of application is a breeze. If you overdo it, let the wash dry then just grab a cotton bud (a.k.a. q-tip), moisten with spirit and dab off the excess.
I found as I was doing it that I was overdoing it a lot, but as I was using black paint what I ended up with was a greasy, oily-looking patina on the model which I actually quite liked! So I went bonkers and washed the whole mini, not just the panel lines. I got a nice shadowy halo effect around the raised features as a result.
When dry, another coat of gloss varnish seals it all in place and readies the model for decals.
And that's where I am now: washed and decals applied. The Valkyrie is now looking like this:
My next update should be my final one:
weathering the paint by adding some chipping effects. I'm going to use the
same technique and colours that I used on my
Baneblade to keep a uniform look across the army (I'm going to go back soon and retro-fit a lot of the techniques I've learned recently to my older IG tanks which look very, very amateurish and wouldn't sit well alongside the Valkyrie and
Baneblade without being updated).
Update: 21/02/2014
It's been a week since my last update but loads has happened on the Valkyrie.
 |
| It's got a finished base now |
I've magnetised all the weapons. Here it is with it's multi-laser (and canopy, which won't be glued into place until the oil wash, decals and varnish is done:
And here it is with multi-launchers and lascannon (in place of the multi-laser):
This pic shows the magnets on the weapons. The small black widget in the middle of the underside of the wing is where they attach. It's jsut had a couple of lengths of paper-clip super-glued into it:
And (my bestest most proudest achievement): I've stencilled a design onto the wings!
Thanks to
Sincain40K for the wings template - there are others (mostly Dark Angels) there too for anyone who needs them.
Next up should be oil-wash. Stay tuned.
Update: 14/02/2014
Well, I haven't been idle.
The wings are now fully built and can be attached and removed as required (I can't claim any special credit for that - the design of the model lends itself nicely to a "push-fit").
Also nearly complete is the aircraft's "nose":
My next task is to build (but not attach) the canopy. Attachment of the canopy will wait until after the plane has been varnished. I'm also planning to magnetise the weapons so I can switch from missiles to missile pods and from lascannon to multi-laser. If I can, I'll also pick up some Twin-Linked lascannons so I can field this model as a Vendetta gunship.
Also on the to-do list:
- My first go at oil "pin-washing"
- Stencilling some emblems on the wings
- Finish off the paintjob of the various details (lights, handles and sensors etc.) that are dotted around the model,
- Weathering
- Basing
As always: Stay tuned!
Update: 11/02/2014
Quite a bit more work done over the last four days - assembly is underway:
 |
| I've attached the main fuselage to the tailplane |
 |
| The tailplane is what holds the doors on. They're designed to slide open and closed. |
 |
| Also attached are the heavy bolter pintles and the engines |
I had a minor disaster with the heavy bolter pintles. I lost a piece so had to improvise with some scrap. I've managed to keep everything moving as designed so the bolters swing in-and-out of the doors when opened. The pics above show the pintles without the bolters attached.
For my next update, I'll be building the "nose" of the aircraft and attaching the bolters. Stay tuned!
Update: 07/02/2014
It seems a long time since my last update - it was only four days ago!
Since then I've been busy drybrushing - all the metallic parts are done:
And the grey panel-exteriors are done:
And I've begun assembly of the plane:
 |
| I'd rotated this image 90 degrees left, but blogspot seems intent on ignoring that! |
I've also done some work on the cockpit and pilots:
 |
| I'd rotated this image 90 degrees left too! What gives, blogspot? |
All this has served to remind me why I normally glue stuff together before painting. I'm so ham-fisted that I tend to get my fingers covered in glue as I work. That's not so much of a problem on unpainted models, but liquid poly does have a tendency to melt acrylic paint if you put a messy finger in the wrong place.
Still, you live and learn.
Introduction: 03/02/2014
I wish I could "stick with the programme". There I was, merrily working on preparing Blood Bowl teams and Painting my
Baneblade when I got sidetracked into starting another project. Two, actually, but more about the other project later.
Mike, who many years ago bought me the
Baneblade model, also bought me (many years ago) a Valkyrie. I was so please with how well the
Baneblade has gone, that I've slipped into "Imperial Guard armour mode" and decided to start work on the Valkyrie, even though we don't have a game of W40K planned for over a year.
My muse is upon me.
So here's the first in a series about building the Valkyrie.
For openers, I've partially constructed the model. I've decided to do something with this one that I wouldn't normally do which is to work on keeping all the parts which are designed to move (doors etc.) able to do so. I'd normally just glue them all shut for simplicity.
So aside from the partial assembly and spraycan basecoat (which is either matt black or matt grey, depending on whether the part in question is going to be a mettalic bit or an armour panel) I've been working on the interior detail for the main fuselage crew cabin.
 |
| Front bulkhead |
 |
| Roof with lights |
 |
| Side panel |
 |
| Other side panel |
The "other project" I referred to? Well, I'm awaiting the delivery of some bitz at the moment, but I'm planning to build a full Sentinel Platoon. 10 models - three squadrons of three models and a commander. Wish me luck!
